provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI C37.16
(2000) Low-Voltage Power Circuit Breakers
and AC Power Circuit Protectors -
Preferred Ratings, Related Requirements,
and Application Recommendations
ANSI C37.50
(1989; R 2000) Low-Voltage AC Power
Circuit Breakers Used in Enclosures - Test
Procedures
ANSI C37.51
(1989; R 2002) Metal Enclosed Low-Voltage
AC Power, Circuit-Breaker Switchgear
Assemblies-Conformance Test Procedures
ANSI C39.1
(1981; R 1992) Requirements for Electrical
Analog Indicating Instruments
ANSI C57.12.50
(1981; R 1998) Sealed Dry-Type
Distribution Transformers 1 to 500 kVA,
Single-Phase; and 15 to 500 kVA,
Three-Phase with High-Voltage 601 to 34
500 Volts, Low-Voltage 120 to 600 Volts
ANSI C57.12.51
(1981; R 1998) Ventilated Dry-Type Power
Transformers, 501 kVA and Larger,
Three-Phase, with High-Voltage 601 to 34
500 Volts, Low-Voltage 208Y/120 to 4160
Volts
ANSI C80.1
(1994) Rigid Steel Conduit - Zinc Coated
ANSI C80.3
(1994) Electrical Metallic Tubing, Zinc
Coated
ASME INTERNATIONAL (ASME)
ASME B1.1
(2001; R 2003) Unified Inch Screw Threads
(UN and UNR Thread Form)
ASME B1.20.1
(1983; R 2001) Pipe Threads, General
Purpose, Inch
ASTM INTERNATIONAL (ASTM)
ASTM B 187/B 187M
(2003) Copper, Bus Bar, Rod and Shapes and
General Purpose Rod, Bar and Shapes
ASTM B 188
(2002) Seamless Copper Bus Pipe and Tube
SECTION 16404A
Page 9
Previous Page
