submittal requires Government approval. Some
submittals are already marked with a "G". Only
delete an existing "G" if the submittal item is not
complex and can be reviewed through the Contractor's
Quality Control system. Only add a "G" if the
submittal is sufficiently important or complex in
context of the project.
For submittals requiring Government approval on Army
projects, a code of up to three characters within
the submittal tags may be used following the "G"
designation to indicate the approving authority.
Codes for Army projects using the Resident
Management System (RMS) are: "AE" for
Architect-Engineer; "DO" for District Office
(Engineering Division or other organization in the
District Office); "AO" for Area Office; "RO" for
Resident Office; and "PO" for Project Office. Codes
following the "G" typically are not used for Navy
projects.
Submittal items not designated with a "G" are
considered as being for information only for Army
projects and for Contractor Quality Control approval
for Navy projects.
**************************************************************************
Government approval is required for submittals with a "G" designation;
submittals not having a "G" designation are for [Contractor Quality Control
approval.] [information only. When used, a designation following the "G"
designation identifies the office that will review the submittal for the
Government.] The following shall be submitted in accordance with Section
01330 SUBMITTAL PROCEDURES:
SD-02 Shop Drawings
Shop Drawings[; G][; G, [_____]]
Installation[; G][; G, [_____]]
Submit dimensions and weights.
Terminal Blocks[; G][; G, [_____]]
Submit prints of wiring and terminal drawings in accordance with
Contract Clause CONTRACTOR'S DRAWINGS AND DATA, which will be
marked and returned to the Contractor for addition of the
designations to the terminal strips and tracings, along with any
rearrangement of points required.
SD-03 Product Data
Switchgear
Power Circuit Breakers
Submit descriptive date including manufacturer types and catalog
numbers for equipment.
Submit curve sheets for power supply and bus tie circuit
SECTION 16404A
Page 12
Previous Page
