A certification that contains the names and the qualifications
of people recommended to perform the splicing and termination of
medium-voltage cables approved for installation under this
contract. The certification shall indicate that any person
recommended to perform actual splicing and terminations has been
adequately trained in the proper techniques and have had at least
three recent years of experience in splicing and terminating the
same or similar types of cables approved for installation. In
addition, any person recommended by the Contractor may be required
to perform a practice splice and termination, in the presence of
the Contracting Officer, before being approved as a qualified
installer of medium-voltage cables. If that additional
requirement is imposed, the Contractor shall provide short
sections of the approved types of cables along with the approved
type of splice and termination kits, and detailed manufacturer's
instruction for the proper splicing and termination of the
approved cable types.
Installation Engineer
The Contractor shall provide at least one onsite person in a
supervisory position with a documentable level of competency and
experience to supervise all cable pulling operations. A resume
shall be provided showing the cable installers' experience in the
last three years, including a list of references complete with
points of contact, addresses and telephone numbers.
SD-10 Operation and Maintenance Data
Operation and Maintenance Manuals
[Six] [_____] copies of operation and maintenance manuals,
within [7] [_____] calendar days following the completion of tests
and including assembly, installation, operation and maintenance
instructions, spare parts data which provides supplier name,
current cost, catalog order number, and a recommended list of
spare parts to be stocked. Manuals shall also include data
outlining detailed procedures for system startup and operation,
and a troubleshooting guide which lists possible operational
problems and corrective action to be taken. A brief description
of all equipment, basic operating features, and routine
maintenance requirements shall also be included. Documents shall
be bound in a binder marked or identified on the spine and front
cover. A table of contents page shall be included and marked with
pertinent contract information and contents of the manual. Tabs
shall be provided to separate different types of documents, such
as catalog ordering information, drawings, instructions, and spare
parts data. Index sheets shall be provided for each section of
the manual when warranted by the quantity of documents included
under separate tabs or dividers. Three additional copies of the
instructions manual shall be provided within 30 calendar days
following the manuals.
1.4
DELIVERY, STORAGE, AND HANDLING
Devices and equipment shall be visually inspected by the Contractor when
received and prior to acceptance from conveyance. Stored items shall be
protected from the environment in accordance with the manufacturer's
published instructions. Damaged items shall be replaced. Oil filled
SECTION 16375A
Page 15
Previous Page
