UL 510
(2005) Polyvinyl Chloride, Polyethylene,
and Rubber Insulating Tape
UL 514A
(2004) Metallic Outlet Boxes
UL 6
(2000; Rev thru May 2003) Rigid Metal
Conduit
UL 651
(2000) Schedule 40 and 80 Rigid PVC Conduit
UL 854
(2004) Service-Entrance Cables
UL 857
(2001; Rev thru Nov 2002) Busways
1.2
GENERAL REQUIREMENTS
**************************************************************************
NOTE: Select the features and fill in blanks with
selections appropriate for the design condition and
in accordance with guidance contained in TM
5-811-1/AF AFJMAN 32-1080.
**************************************************************************
1.2.1
Terminology
Terminology used in this specification is as defined in ANSI C42.100.
1.2.2
Service Conditions
**************************************************************************
NOTE: See TM 5-811-1/AF AFJMAN 32-1080 for guidance
regarding service conditions. Retain or add the
required conditions.
Provide seismic requirements, if a Government
designer is the Engineer of Record, and show on the
drawings. Delete the inappropriate bracketed
phrase. Sections 13080 and 16070A, properly edited,
must be included in the contract documents.
**************************************************************************
Items provided under this section shall be specifically suitable for the
following service conditions. Seismic details shall [conform to Sections
13080 SEISMIC PROTECTION FOR MISCELLANEOUS EQUIPMENT and 16070A SEISMIC
PROTECTION FOR ELECTRICAL EQUIPMENT] [be as indicated].
a.
Fungus Control [_____]
b.
Altitude [_____] m feet.
c.
Ambient Temperature [_____] degrees C degrees F.
d.
Frequency [_____]
e.
Ventilation [_____]
f.
Seismic Parameters [_____]
SECTION 16375A
Page 11
Previous Page
