A remote stop switch is required by NFPA 37 for 100
hp and above engines, and by NFPA 110 for both Level
1 and Level 2 applications. A remote fuel shutoff
switch, and a remote lube-oil shutoff switch are
required by NFPA 37 for 100 hp and above engines.
Delete the remote fuel shutoff switch, and a remote
lube-oil shutoff switch where not required.
**************************************************************************
A local control panel shall be provided with controls [as indicated] [in
accordance with NFPA 110 level [1] [2]] [and as follows] mounted [either on
or adjacent to the engine generator set] [as indicated]. A remote control
panel shall be provided [with devices as indicated] [fully redundant to the
Device/Condition/
Corps Requirement
NFPA 110
NFPA 110
MFG
Function
Level 1
Level 2
Offering
Controls
Switch: run/start
CP
CP/STD
- off/set - auto
Emergency stop switch
CP
CP/STD
& alarm
Lamp test/indicator test
CP
CP VA
CP VA
CP/STD
Common alarm contacts/
X
X
CP/O
fault relay
Panel lighting
CP
CP/STD
Audible alarm &
CP
silencing/reset switch
Voltage adjust for voltage
CP
CP/STD
Regulator
Pyrometer display
CP
w/selector switch
Remote emergency stop switch
CP VA
CP VA
Remote fuel shutoff switch
Remote lube-oil shutoff switch
2.17.2
Engine Generator Set Metering and Status Indication
**************************************************************************
NOTE: Delete the remote (control room) panel if the
application is not a prime power application.
Provide plan and elevation drawings of the remote
panels for prime power applications, depicting
specific devices, instrument, and meters, including
layouts. Edit the table to include all required
devices. Delete optional devices that are not
required for the application. Delete all columns
except the first column and the appropriate
reference column (always delete the "MFG Offering"
column). Add any necessary parameters to define
devices required. A fuel meter display should be
added for prime rated applications. A fuel header
pressure display should be added for prime rated
applications. Delete the pyrometer devices for sets
SECTION 16264A
Page 51
Previous Page
