MANUFACTURERS STANDARDIZATION SOCIETY OF THE VALVE AND FITTINGS
INDUSTRY (MSS)
MSS SP-58
(2002) Pipe Hangers and Supports -
Materials, Design and Manufacture
MSS SP-69
(2002) Pipe Hangers and Supports -
Selection and Application
MSS SP-80
(2003) Bronze Gate, Globe, Angle and Check
Valves
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
NEMA AB 1
(2002) Molded-Case Circuit Breakers,
Molded Case Switches, and Circuit-Breaker
Enclosures
NEMA ICS 2
(2000; R
2004) Industrial Controls and
Systems:
Controllers, Contactors, and
Overload
Relays Rated Not More than 2000
Volts AC
or 750 Volts DC
NEMA ICS 6
(1993; R 2001) Industrial Control and
Systems: Enclosures
NEMA MG 1
(2003; R 2004) Motors and Generators
NEMA PB 1
(2000) Panelboards
NEMA SG 6
(2000) Power Switching Equipment
NEMA WC 74
(2000) 5-46 kV Shielded Power Cable for
Use in the Transmission and Distribution
of Electric Energy
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 110
(2002) Emergency and Standby Power Systems
NFPA 30
Code
NFPA 37
(2002) Installation and Use of Stationary
Combustion Engines and Gas Turbines
NFPA 70
(2005) National Electrical Code
NFPA 99
(2005) Health Care Facilities
SOCIETY OF AUTOMOTIVE ENGINEERS INTERNATIONAL (SAE)
SAE ARP892
(1965; R 1994) DC Starter-Generator, Engine
SAE J537
(2000) Storage Batteries
UNDERWRITERS LABORATORIES (UL)
UL 1236
(2002) Battery Chargers for Charging
SECTION 16264A
Page 8
Previous Page
