c.
The minimum allowable inlet fuel temperature.
Manufacturer's Catalog
Manufacturer's standard catalog data describing and depicting
each engine-generator set and all ancillary equipment in
sufficient detail to demonstrate specification compliance.
Vibration Isolation
Vibration isolation system performance data for the range of
frequencies generated by the engine-generator set during operation
from no load to full load and the maximum vibration transmitted to
the floor. Description of seismic qualification of the
engine-generator mounting, base, and vibration isolation.
Instructions[; G][; G, [_____]]
Instructions including: the manufacturer's pre-start checklist
and precautions; startup procedures for test mode, manual-start
mode, and automatic-start mode, (as applicable); running checks,
procedures, and precautions; and shutdown procedures, checks, and
precautions. Instructions shall include procedures for
interrelated equipment (such as heat recovery systems,
co-generation, load-shedding, and automatic transfer switches).
Instructions shall be weatherproof, laminated in plastic, framed,
and posted where directed. Posted data shall include wiring and
control diagrams showing the key mechanical and electrical control
elements, and a diagrammatic layout of the system.
Experience
Statement showing that each component manufacturer has a minimum
of 3 years experience in the manufacture, assembly and sale of
components used with stationary diesel-engine generator sets for
commercial and industrial use. The engine-generator set
manufacturer/assembler has a minimum of 3 years experience in the
manufacture, assembly and sale of stationary diesel
engine-generator sets for commercial and industrial use.
Field Engineer
A letter listing the qualifications, schools, formal training,
and experience of the field engineer.
Site Welding
A letter listing the welder qualifying procedures for each
welder, complete with supporting data such as test procedures
used, what was tested to, and a list of the names of all welders
and their qualifications symbols.
General Installation
A complete copy of the manufacturer's installation procedures.
A detailed description of the manufacturer's recommended break-in
procedure.
Site Visit
SECTION 16264A
Page 11
Previous Page
