applications, incorporate the appropriate paragraphs
from UFGS-16263A. Select the features and fill in
blanks with values appropriate for the design
condition. This specification does not apply to 400
Hz applications.
**************************************************************************
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI C12.11
(1987) Instrument Transformers for Revenue
Metering, 10 kV BIL through 350 kV BIL
(0.6 kV NSV through 69 kV NSV)
ANSI C39.1
(1981; R 1992) Requirements for Electrical
Analog Indicating Instruments
ASME INTERNATIONAL (ASME)
ASME B16.11
(2002) Forged Fittings, Socket-Welding and
Threaded
ASME B16.3
(1998) Malleable Iron Threaded Fittings
ASME B16.5
(2003) Pipe Flanges and Flanged Fittings
ASME B31.1
(2004) Power Piping
ASME BPVC SEC IX
(2001) Boiler and Pressure Vessel Code;
Section IX, Welding and Brazing
Qualifications
ASME BPVC SEC VIII D1
(2001) Boiler and Pressure Vessel Code;
Section VIII, Pressure Vessels Division 1
- Basic Coverage
ASSOCIATION OF EDISON ILLUMINATING COMPANIES (AEIC)
AEIC CS6
(1996) Ethylene Propylene Rubber Insulated
Shielded Power Cables Rated 69 kV
AEIC CS8
(2000) Extruded Dielectric Shielded Power
Cables Rated 5 Through 46 kV
SECTION 16264A
Page 6
Previous Page
