MANUFACTURERS STANDARDIZATION SOCIETY OF THE VALVE AND FITTINGS
INDUSTRY (MSS)
MSS SP-58
(2002) Pipe Hangers and Supports -
Materials, Design and Manufacture
MSS SP-69
(2002) Pipe Hangers and Supports -
Selection and Application
MSS SP-70
Threaded Ends
MSS SP-71
(1997) Gray Iron Swing Check Valves,
Flanged and Threaded Ends
MSS SP-80
(2003) Bronze Gate, Globe, Angle and Check
Valves
MSS SP-85
Flanged and Threaded Ends
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
NEMA C50.10
(1990) Rotating Electrical Machinery -
Synchronous Machines
NEMA C50.12
(1982; R 1989) Requirements for Salient
NEMA ICS 6
(1993; R 2001) Industrial Control and
Systems: Enclosures
NEMA MG 1
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 30
Code
NFPA 37
(2002) Installation and Use of Stationary
NFPA 70
(2005) National Electrical Code
U.S. DEPARTMENT OF DEFENSE (DOD)
MIL-DTL-5624
(Rev U) Turbine Fuel, Aviation, Grades
JP-4 and JP-5
MIL-PRF-16884
(Rev K) Fuel, Naval Distillate
MIL-STD-461
(Rev E) Requirements for the Control of
Characteristics of Subsystems and Equipment
U.S. GENERAL SERVICES ADMINISTRATION (GSA)
FS A-A-52557
(Rev A)) Fuel Oil, Diesel; for Posts,
SECTION 16237N
Page 7