Functional Performance Test Checklist - Pumps for Pump (Cont.)

Functional Performance Test Checklist - Pumps

For Pump: [_____]

Pump inlet pressure (psig)

__________

Pump outlet pressure

__________

Pump flow rate (gpm)

__________

2. Verify motor amperage each phase and voltage phase to phase and

phase to ground for both the full flow and the minimum flow conditions.

a.

Full flow:

PHASE 1

PHASE 2

PHASE 3

Amperage

__________ __________ __________

Voltage

__________ __________

Voltage

_________________________

Voltage to ground

__________ __________ __________

b.

Minimum flow:

PHASE 1

PHASE 2

PHASE 3

Amperage

__________ __________ __________

Voltage

__________ __________

Voltage

_________________________

Voltage to ground

__________ __________ __________

3.

Unusual vibration, noise, etc.

___________________________________________________________________________

4. Certification: We the undersigned have witnessed the above functional

performance tests and certify that the item tested has met the performance

requirements in this section of the specifications.

Signature and Date

Contractor's Chief Quality Control Representative

_____________________________

Contractor's Mechanical Representative

_____________________________

Contractor's Electrical Representative

_____________________________

Contractor's Testing, Adjusting and Balancing Representative

_____________________________

Contractor's Controls Representative

_____________________________

Contracting Officer's Representative

_____________________________

Using Agency's Representative

_____________________________

SECTION 15995A

Page 36