Provide finishes [as indicated.] [as listed below:
a. Floor; [carpet] [vinyl composition tile] [vinyl sheet tile]
[_____].
b. Walls; [prefinished steel panels] [laminated plastic on
particleboard] [laminated plastic on particleboard with rounded
stainless steel angle edges] [stainless steel] [_____]. Provide
each cab wall with equally spaced and equally sized wall panels.
Conceal all fasteners. Wall trim; [prefinished steel] [stainless
steel] [_____]. Accessories; [hand rails] [_____].
c. Interior face of door(s); [prefinished steel panels]
[stainless steel] [_____].
d. Ceilings; [supported] [prefinished steel panels] [anodized
aluminum] [eggcrate] [_____]. Ceiling frame; [prefinished steel]
[stainless steel] [anodized aluminum] [_____].
[e. Hoistway Doors and Frame Finishes; provide finishes on
exterior of hoistway as follows:
(1) Frame; [prefinished steel] [stainless steel] [_____].
(2) Exterior face of door; [prefinished steel] [stainless steel]
[_____].]]
2.2
FREIGHT ELEVATORS
2.2.1
Basic Requirements
**************************************************************************
NOTE: For details of loading classes, refer to ASME
A17.1, Sections 2.16.2.2 and 3.23.
**************************************************************************
a.
Rated Load: [_____] kg lbs.
b.
Rated Speed: [_____] mps fpm
c.
Travel Length: [_____] m ft.
d.
Number of Stops: [_____]
e.
Number of Hoist Way Openings: [_____] Front; Rear [_____]
f. Car Inside Dimensions: [_____] mm wide, [_____] mm deep and
[_____] mm high [_____] ft.-in. wide, [_____] ft.-in. deep and
[_____] ft.-in. high
g. Hoistway Door Type & Size: [Manual] [Power Operated] Vertical
[Bi-Parting] [Rising] [_____] mm wide and [_____] mm high [_____]
ft.-in. wide and [_____] ft.-in. high
h.
Car Gate Type: [Manual] [Power Operated] Vertical rising
i.
Loading Type: Class [A] [B] [C]
SECTION 14240
Page 14
Previous Page
