of four stories or more in height, provide at least
one elevator of size to accommodate emergency
medical services.
**************************************************************************
g. Car Inside Dimensions: [_____] mm wide, [_____] mm deep and
[_____] mm high [_____] ft. [_____] in. wide, [_____] ft. [_____]
in. deep and [_____] ft. [_____] in. high
**************************************************************************
NOTE: For car door opening of passenger and service
elevators, 1065 mm 3 ft. 6 in. is standard, except
with 1800 kg 4000 lb. passenger cars, use 1200 mm 4
ft. 0 in.. For special purposes, 1525 mm 5 ft. 0 in.
opening may be used.
**************************************************************************
h.
Car Door Opening: [_____] mm wide and [_____] mm high [_____] ft.
[_____] in. wide and [_____] ft. [_____] in. high
**************************************************************************
NOTE: Use two speed center opening option
restrictively for elevators where larger door
opening is needed and hoistway space is not
available for single speed. Otherwise, use
single-speed side slide, single-speed center
opening, or two speed side slide.
**************************************************************************
i.
Car Door Types: [Single-speed side slide][Single-speed Center
opening][Two-speed side slide][Two-speed center opening]
Horizontal sliding.
2.1.1.1
Cab Enclosures and Door Finishes
**************************************************************************
NOTE: Indicate finish colors of elevator materials
in finish schedule on drawings.
**************************************************************************
**************************************************************************
NOTE: Use stainless steel side panels and wall trim
in hospital cars.
**************************************************************************
Provide finishes [as indicated.][as listed below:
a.
Floor; [carpet][vinyl composition tile][vinyl sheet tile][_____].
b.
Walls; [prefinished steel][laminated plastic] on particleboard
[stainless steel][_____]. Provide each cab wall with equally
spaced and equally sized wall panels. All wall panel fasteners
shall be concealed.
Wall trim; [prefinished steel][stainless steel][_____].
Accessories; [hand rails][_____].
c.
Interior face of door(s); [prefinished steel panels][stainless
steel] [Laminated plastic on particleboard with rounded stainless
SECTION 14210N
Page 10
Previous Page
