steel angle edges][_____].
d.
Ceilings; [supported][prefinished steel panels][anodized
aluminum][eggcrate][_____].
Ceiling frame; [prefinished steel][stainless steel][anodized
aluminum][_____].
e.
Hoistway Doors and Frame Finishes
Provide finishes on exterior of hoistway as follows:
(1).
Frame; [prefinished steel][stainless steel][_____].
(2). Exterior face of door; [prefinished steel][stainless
steel][_____].]
][2.1.2
Freight Elevators
a.
Type:
[Geared] [Gearless]
b.
Rated Load:
[_____] kg [_____] lb.
c.
Rated Speed:
[_____] m/s [_____] fpm
d.
Travel Length:
[_____] m [_____] ft.
e.
Number of Stops:
[_____]
f.
Number of Hoistway Openings:
[_____] Front; [_____] Rear
g.
Car Inside Dimensions: [_____] mm wide [_____] mm deep and
[_____] mm high [_____] ft. [_____] in. wide, [_____] ft. [_____]
in. deep and [_____] ft. [_____] in. high
h.
Hoistway Door Type & Size: [Manual] [Power operated] Vertical
[Rising] [Bi-Parting] [_____] mm wide and [_____] mm high [_____]
ft. [_____] in. wide and [_____] ft. [_____] in. high
i.
Car Gate Type:
[Manual] [Power operated] Vertical Rising
**************************************************************************
NOTE: Refer to ASME A17.1, Rule 207.2b for Classes
of loading.
**************************************************************************
j.
Loading Type:
Class [A][B][C]
2.1.2.1
Cab Enclosures and Door Frame Finishes
**************************************************************************
NOTE: Indicate finish colors of elevator materials
in finish schedule on drawings.
**************************************************************************
**************************************************************************
NOTE: Use stainless steel side panels and wall trim
in hospital cars.
**************************************************************************
SECTION 14210N
Page 11
Previous Page
