NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN WELDING SOCIETY (AWS)
AWS D1.1/D1.1M
(2004) Structural Welding Code - Steel
ASME INTERNATIONAL (ASME)
ASME A17.1
(2004) Handbook on Safety Code for
Elevators and Escalators
ASME A17.2.1
(1994) Checklist for Inspection and Test
of Electric Elevators
ASTM INTERNATIONAL (ASTM)
ASTM E 152
(1981ae2) Fire Tests of Door Assemblies
INTERNATIONAL CONFERENCE OF BUILDING OFFICIALS (ICBO)
ICBO UBC
(2000) Uniform Building Code (3 Vol.)
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
NEMA MG 1
(2003; R 2004) Motors and Generators
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 70
(2005) National Electrical Code
U.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)
29 CFR 1910.27
Fixed Ladders
36 CFR 1191
Americans with Disabilities Act (ADA)
Accessibility Guidelines for Buildings and
Facilities
1.2
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
submittal requires Government approval. Some
SECTION 14210N
Page 5
Previous Page
