the facility location [and operator] and a 24-hour point of contact.
Furnish two copies of [USEPA] [State (in accordance with 16 VAC 25-35)]
[and] [local] hazardous waste [permit applications] [permits]
[manifests] [and] [USEPA Identification numbers].
d. Names and qualifications (experience and training) of personnel who
will be working on-site with hazardous wastes.
e. List of waste handling equipment to be used in performing the work,
to include cleaning, volume reduction, and transport equipment.
f. Spill prevention, containment, and cleanup contingency measures
including a health and safety plan to be implemented in accordance with
29 CFR 1926.65.
g. Work plan and schedule for waste containment, removal and disposal.
Proper containment of the waste includes using acceptable waste
containers (e.g., 55-gallon drums) as well as proper marking/labeling
of the containers. Wastes shall be cleaned up and containerized daily.
h. Include any process that may alter or treat waste rendering a
hazardous waste non hazardous.
i. Unit cost for hazardous waste disposal according to this plan.
1.5.2.9
Environmental, Safety and Health Compliance
**************************************************************************
NOTE: Include applicable State, regional, and local
laws, regulations, and statutes. Do careful research
since not all State and local laws are similar.
Verify with the State or local authorities whether
the city, county, State and/or the USEPA has
jurisdiction and whether licensing and/or
certification is required. Also identify the
authority or code sponsor and the laws, regulations
and statutes cited under paragraph entitled
"References" using complete title and number.
**************************************************************************
In addition to the detailed requirements of this specification, comply with
laws, ordinances, rules, and regulations of federal, State, and local
authorities regarding lead. Comply with the applicable requirements of the
current issue of 29 CFR 1926.62. Submit matters regarding interpretation of
standards to the Contracting Officer for resolution before starting work.
Where specification requirements and the referenced documents vary, the
most stringent requirement shall apply. [The following [local] [and]
[State] laws, ordinances, criteria, rules and regulations regarding
removing, handling, storing, transporting, and disposing of
lead-contaminated materials apply:
a. [_____]
b. [_____]
c. [_____]
[
[Licensing] [and certification] in the state of [_____] is required.]]
SECTION 13282N
Page 14
Previous Page
