equipment and their basic operating features. The instructions
shall include, but not be limited to, the following:
a. System layout showing piping, valves and controls, process
flow diagrams, piping and instrumentation diagrams with all
valves, meters, and similar units identified.
b. Approved wiring and control diagrams prepared in accordance
with ISA S5.1 including a drawing index, legend and symbols list,
and abbreviations and identifiers.
c. A control sequence describing startup, how to make
adjustments to the equipment during operation, standard and
emergency shutdown procedures.
d. Operating and maintenance instructions for each piece of
equipment, including lubrication instructions and other periodic
maintenance and inspection information as well as trouble shooting
guides.
e. Manufacturer's bulletins, cut sheets and descriptive data,
parts lists, and recommended spare parts, and sources of supply
for all major pieces of equipment.
1.4
SYSTEM DESCRIPTION
**************************************************************************
NOTE: This paragraph should be edited to identify
the appropriate contaminants of concern as well as
those parameters which potentially inhibit the
process as indicated in ETL 1110-1-161
ULTRAVIOLET/CHEMICAL OXIDATION dated 29 March 96.
Effluent limitations are generally dictated by
regulatory requirements. List the performance
requirements in this specification and cross
reference Section 01450A CHEMICAL DATA QUALITY
CONTROL for the analytical and sampling protocols.
If this specification is used as part of a Request
for Proposals, the designer should identify maximum
values for power and oxidant usage based on bench or
pilot studies and include this information in
Paragraph Performance Requirements.
**************************************************************************
The AOP shall include all items necessary to provide a complete system for
removal of those chemicals identified below to the levels indicated.
Equipment includes, but is not limited to, AOP contact vessels, lamps when
required, piping to units upstream and downstream of the contact vessels,
oxidant feed system, gas emission treatment, controls, accessories and
equipment to provide complete and functional system within the limits
identified. Analytical and sampling protocols shall be as specified in
Section 01450A CHEMICAL DATA QUALITY CONTROL.
1.4.1
Minimum equipment life
[20] [_____] years
SECTION 11377
Page 11
Previous Page
