form, framed and posted beside the diagrams.
Performance Requirements[; G][; G, [_____]]
Qualifications[; G][; G, [_____]]
A statement by the equipment manufacturer listing any exception
to or deviations from the contract drawings and specifications.
Written evidence that equipment and accessories are a product of a
qualified and experienced manufacturer. Statement indicating the
system is capable of treating the wastes to the levels identified.
A statement indicating the operators designated to train the on
site operators have been trained to operate the installed
equipment.
SD-06 Test Reports
Performance Requirements[; G][; G, [_____]]
a. Performance tests results indicating temperature rise
through the reactor, oxidant dosage, detention time, catalyst
dosage, ultraviolet light dosage, ambient gas monitoring results,
and treatment system off gas monitoring and destruction results,
equipment and analytical testing methods used, and removal of
constituents identified in paragraph Performance Requirements
stated in mass/unit volume treated relative to the influent
concentration.
b. Report in booklet form, upon completion of the installed
system. Test report shall include field tests performed to adjust
each component and field tests conducted to prove compliance with
the specified performance criteria. Test report shall indicate
the recommended position of the controls.
SD-07 Certificates
AOP System
Manufacturer's certificates stating that the equipment meets the
specified requirements, and has been installed in accordance with
the equipment manufacturer's requirements.
Field Training
Certificates indicating the designated personnel have received
training specified and have successfully operated the installed
AOP equipment.
SD-10 Operation and Maintenance Data
AOP System[; G][; G, [_____]]
Maintenance[; G][; G, [_____]]
[Six] [_____] complete copies of operating instructions
outlining the step-by-step procedures required for system
start-up, operation and shutdown, routine maintenance, potential
breakdowns and repairs, and troubleshooting. The instructions
shall include drawings and schematics of the system as installed.
The instructions shall include the manufacturer's name, model
number, service manual parts list and brief description of all
SECTION 11377
Page 10
Previous Page
