Coatings Qualification Test Reports; G, [_____]
Coating Sample Test Reports; G, [_____]
Abrasive Sample Test Reports; G, [_____]
Daily Inspection Reports; G, [_____]
Recycled Metallic Abrasive Field Test Reports (Daily and Weekly);
G, [_____]
SD-07 Certificates
Work Plan; G, [_____]
Qualifications of Certified Industrial Hygienist (CIH); G, [_____]
Qualifications of Testing Laboratory for Coatings; G, [_____]
Qualifications of Testing Laboratory for Abrasive; G, [_____]
Qualifications of Coating Contractors; G, [_____]
[
Qualifications of Coating Manufacturer's Representative; G, [_____]
]
Joint Sealant Materials; G, [_____]
Coating Materials; G, [_____]
Coating System Component Compatibility; G, [_____]
Non-metallic Abrasive; G, [_____]
Metallic Abrasive; G, [_____]
SD-08 Manufacturer's Instructions
Joint Sealant Instructions; G, [_____]
Coating System Instructions; G, [_____]
SD-11 Closeout Submittals
Disposal of Used Abrasive; G, [_____]
Inspection Logbook; G, [_____]
1.4
QUALITY ASSURANCE
[1.4.1
Design Data
1.4.1.1
Containment System
Submit complete design drawings and calculations for the scaffolding and
containment system, including an analysis of the loads which will be added
to the structure by the containment system and waste materials. [A
registered engineer shall approve calculations and scaffold system design.]
SECTION 09971
Page 11
Previous Page
