SSPC PA 2
(1996; R 2002) Measurement of Dry Coating
Thickness With Magnetic Gages
SSPC QP 1
(1998; R 2000) Standard Procedure for
Evaluating Painting Contractors (Field
Application to Complex Industrial
Structures)
SSPC SP 1
(1982; R 2000) Solvent Cleaning
SSPC SP 10
(2000) Near-White Blast Cleaning
SSPC SP 7
(2000) Brush-Off Blast Cleaning
SSPC SP COM
(2000) Surface Preparation Commentary for
Steel and Concrete Substrates
SSPC VIS 1
(2002) Guide and Reference Photographs for
Steel Surfaces Prepared by Dry Abrasive
Blast Cleaning
U.S. DEPARTMENT OF DEFENSE (DOD)
(Rev B; Am 2) Abrasive Blasting Media Ship
Hull Blast Cleaning
MIL-DTL-24441
(Rev C; Supp 1) Paint, Epoxy-Polyamide
MIL-DTL-24441/19
(Rev B) Paint, Epoxy-Polyamide, Zinc
Primer, Formula 159, Type III
MIL-DTL-24441/31
(Rev A) Paint, Epoxy-Polyamide, White,
Formula 152, Type IV
MIL-PRF-85285
(Rev D) Coating: Polyurethane Aircraft and
Support Equipment
MIL-STD-161
(Rev F, Notice 2) Identification Methods
for Bulk Petroleum Products Systems
Including Hydrocarbon Missile Fuels
U.S. GENERAL SERVICES ADMINISTRATION (GSA)
FED-STD-595
(Rev B; Am 1) Colors, Volume
1
FS TT-S-00230
(Rev C; Am 2) Sealing Compound,
Elastomeric Type, Single component (For
caulking, sealing, and glazing in
buildings and other structures)
U.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)
29 CFR 1910-SUBPART Z
Toxic and Hazardous Substances
29 CFR 1910.1000
Air Contaminants
29 CFR 1910.134
Respiratory Protection
SECTION 09971
Page 9
Previous Page
