weighing not less than 1.4 kg/square meter 2.5 pounds/square yard.
2.2.6
Reinforcing Wire Fabric
Wire fabric shall conform to ASTM A 185. Wire shall be either 50 x 50 mm 2
x 2 inch mesh, 16/16 wire or 38 x 50 mm 1-1/2 x 2 inch mesh, 16/13 wire.
2.3
WATER
Water shall be potable.
2.4
MORTAR, GROUT, AND ADHESIVE
Mortar, grout, and adhesive shall conform to the following:
2.4.1
Dry-Set Portland Cement Mortar
ANSI A108.1.
2.4.2
Conductive Dry-Set Mortar
ANSI A108.1.
2.4.3
Latex-Portland Cement Mortar
ANSI A108.1.
2.4.4
Ceramic Tile Grout
ANSI A108.1; [sand portland cement grout] [dry-set grout] [latex-portland
cement grout] [commercial portland cement grout] [silicone rubber grout].
2.4.5
Organic Adhesive
ANSI A108.1, Type I.
2.4.6
Epoxy Resin Grout
ANSI A108.1.
2.4.7
Furan Resin Grout
ANSI A108.1 and consist of an intimate mixture of furfuryl-alcohol resin
with carbon filler and catalyst.
2.4.8
Cementitious Backer Board
Cementitious backer units, for use as tile substrate over wood sub-floors,
shall be in accordance with ANSI A108.1. Cementitious backer units shall
be [6.35] [12.7] mm [1/4] [1/2]inch thick.
2.4.9
Glass Mat Gypsum Backer Panel
Glass mat water-resistant gypsum backer board, for use as tile substrate
over wood subfloors, shall be in accordance with ASTM C 1178/C 1178M.
Glass mat gypsum backer board shall be [6.35] [12.7] mm [1/4] [1/2] inch
thick.
SECTION 09310
Page 11
Previous Page
