color, style, and number will be inserted and
locations indicated on the drawings. This paragraph
will be coordinated with Section 10800 TOILET
ACCESSORIES.
**************************************************************************
Accessories shall be the built-in type of the same materials and finish as
the wall tile. Accessories shall be provided as follows:
Quantity
Location
a.
Recessed soap holders
[_____]
[_____]
b.
Tumbler holders
[_____]
[_____]
c.
Combination tumbler and
toothbrush holders
[_____]
[_____]
d.
Towel bars, [stainless steel]
[_____]
[_____]
[ceramic] [600] [750] mm
long, two towel posts
d.
Towel bars, [stainless steel]
[_____]
[_____]
[ceramic] [24] [30] inches
long, two towel posts
e.
Robe hooks
[_____]
[_____]
f.
Roll paper holder
[_____]
[_____]
g.
Recessed soap holder
[_____]
[_____]
and hand hold combination:
support static load in
compliance with ASTM F 446
2.2
SETTING-BED
The setting-bed shall be composed of the following:
2.2.1
Aggregate for Concrete Fill
Aggregate shall conform to ASTM C 33. Maximum size of coarse aggregate
shall not be greater than one-half the thickness of concrete fill.
2.2.2
Portland Cement
Cement shall conform to ASTM C 150, Type I, white for wall mortar and gray
for other uses.
2.2.3
Sand
Sand shall conform to ASTM C 144.
2.2.4
Hydrated Lime
Hydrated lime shall conform to ASTM C 206, Type S or ASTM C 207, Type S.
2.2.5
Metal Lath
Metal lath shall be flat expanded type conforming to ASTM C 847, and
SECTION 09310
Page 10
Previous Page
