specified for vestibules, kitchens, walk-in
refrigerators, and work spaces behind serving lanes.
Abrasive surface quarry tile should be considered
for other areas which may become slippery due to
grease or soapy water spillage or for other reasons.
Red quarry tile is the most economical color. If
other colors are desired, they should be limited to
the darker shades.
**************************************************************************
Quarry tile and trim shall be unglazed with [smooth surface] [abrasive
surface]. Tile shall be [150 x 150] [_____] x 13 mm [6 x 6] [_____] x 1/2
inch. Color shall be [in accordance with Section 09915 COLOR SCHEDULE]
[_____].
2.1.3
PAVER TILE
Paver tile shall be [glazed][unglazed], size [100 x 100 x 10 mm 4 x 4 x 3/8
inch][150 x 150 x 10 mm 6 x 6 x 3/8 inch][100 x 200 x 10 mm 4 x 8 x 3/8 inch
]. Color shall be [in accordance with Section 09915 COLOR SCHEDULE]
[_____].
2.1.4
Detectable Warning Tile
Detectable warning tile shall be unglazed with raised truncated domes with
a diameter of nominal 23 mm 0.9 inch at a height of nominal 5 mm 0.2 inch
and a center-to-center spacing of nominal 60 mm 2.35 inches and shall
contrast visually with adjoining surfaces. Tile shall be [150 x 150]
[_____] x 13 mm [6 x 6] [_____] x 1/2 inch. Color shall be [in accordance
with Section 09915 COLOR SCHEDULE] [_____].
2.1.5
Porcelain Tile
Porcelain tile and trim shall be unglazed with the color extending
uniformly through the body of the tile. Tile size shall be nominal [305 by
305] [_____] mm by 8 mm [12 by 12] [_____] inches by 5/16 inch thick. Tile
shall meet or exceed the following criteria: Abrasive wear in accordance
with ASTM C 501 and bonding strength in accordance with ASTM C 482. Tile
shall comply with 36 CFR 1191 for coefficient of friction for interior
floors. Color shall be in accordance with Section 09915 COLOR SCHEDULE.
2.1.6
Glazed Wall Tile
**************************************************************************
NOTE: One type of finish will be retained.
Generally, matte glaze will be used; however, bright
glaze may be selected where a glossy finish would
not be objectionable.
**************************************************************************
Glazed wall tile and trim shall be cushion edged with [bright] [matte]
glaze. Tile shall be [106 x 106] [106 x 150] [150 x 150] mm [4-1/4 x
4-1/4] [4-1/4 x 6] [6 x 6] inches. Color shall be [in accordance with
Section 09915 COLOR SCHEDULE] [_____].
2.1.7
Accessories
**************************************************************************
NOTE: Where glazed accessories are required, the
SECTION 09310
Page 9
Previous Page
