SD-07 Certificates
Tile
Mortar, Grout, and Adhesive
Certificates indicating conformance with specified requirements.
A master grade certificate shall be furnished for tile.
1.3
DELIVERY AND STORAGE
Materials shall be delivered to the project site in manufacturer's original
unopened containers with seals unbroken and labels and hallmarks intact.
Materials shall be kept dry, protected from weather, and stored under cover
in accordance with manufacturer's instructions.
1.4
ENVIRONMENTAL REQUIREMENTS
Ceramic tile work shall not be performed unless the substrate and ambient
temperature is at least 10 degrees C 50 degrees F and rising. Temperature
shall be maintained above 10 degrees C 50 degrees F while the work is being
performed and for at least 7 days after completion of the work. When
temporary heaters are used they shall be vented to the outside to avoid
carbon dioxide damage to new tilework.
1.5
WARRANTY
Manufacturer's standard performance guarantees or warranties that extend
beyond a 1-year period shall be provided.
1.6
EXTRA STOCK
Supply an extra two percent of each type tile used in clean and marked
cartons.
PART 2
PRODUCTS
**************************************************************************
NOTE: Color and pattern must be indicated. When
manufacturer's names, colors, and patterns are
shown, add the following sentence: Colors listed
are for color identification purpose only; the
listing is not intended to limit selection of
similar colors from other manufacturers.
The surface datum will be established for the top of
the tile floors to indicate to other trades the
required elevation for the top of subfloor.
**************************************************************************
2.1
TILE
**************************************************************************
NOTE: Unglazed ceramic tile with low absorption
rates are easier to maintain because they are more
resistant to staining. They do not readily absorb
grease, food or beverage spills, or other staining
agents.
A minimum coefficient of friction of 0.50 (wet and
SECTION 09310
Page 7
Previous Page
