submittal requires Government approval. Some
submittals are already marked with a "G". Only
delete an existing "G" if the submittal item is not
complex and can be reviewed through the Contractor's
Quality Control system. Only add a "G" if the
submittal is sufficiently important or complex in
context of the project.
For submittals requiring Government approval on Army
projects, a code of up to three characters within
the submittal tags may be used following the "G"
designation to indicate the approving authority.
Codes for Army projects using the Resident
Management System (RMS) are: "AE" for
Architect-Engineer; "DO" for District Office
(Engineering Division or other organization in the
District Office); "AO" for Area Office; "RO" for
Resident Office; and "PO" for Project Office. Codes
following the "G" typically are not used for Navy
projects.
Submittal items not designated with a "G" are
considered as being for information only for Army
projects and for Contractor Quality Control approval
for Navy projects.
**************************************************************************
Government approval is required for submittals with a "G" designation;
submittals not having a "G" designation are for [Contractor Quality Control
approval.] [information only. When used, a designation following the "G"
designation identifies the office that will review the submittal for the
Government.] The following shall be submitted in accordance with Section
01330 SUBMITTAL PROCEDURES:
SD-03 Product Data
Tile[; G][; G, [_____]]
Setting-Bed
Mortar, Grout, and Adhesive
Manufacturer's catalog data and preprinted installation and
cleaning instructions.
SD-04 Samples
Tile[; G][; G, [_____]]
Accessories
Marble Thresholds[; G][; G, [_____]]
Grout[; G][; G, [_____]]
Samples of sufficient size to show color range, pattern, type
and joints.
SD-06 Test Reports
Testing[; G][; G, [_____]]
Copy of results for electrical resistance tests.
SECTION 09310
Page 6
Previous Page
