unit price per meter foot of the pile varies as the
length increases or decreases.
**************************************************************************
[Base bids on the number, circumference, and length of piles from tip to
cutoff as indicated. [Test piles shall be [1.5] [_____] meter [5] [_____]
feet longer than bid length piles. [Base bids on the number of load tests
indicated or specified.] From the data obtained as a result of driving the
test piles [and load tests] specified herein, the Government will determine
and list for the Contractor the calculated minimum pile tip elevations, the
driving resistance for piles, or both. The information will be given to
the Contractor no later than 10 days after receipt of complete test pile
data. The list shall be used as the basis for ordering piles. The
Contractor shall not order production piles prior to receipt of the above
information from the Government.] Should the total number of piles or
number of each length vary from that specified as the basis for bidding,
the contract price will be adjusted in accordance with Contract Clause
entitled "Changes." Adjustment in contract price will not be made for
cutting off piles, for any portion of a pile remaining above the cutoff
elevation, or for broken, damaged, or rejected piles.]
**************************************************************************
NOTE: For PACNAVFACENGCOM projects: Edit
applicable attachments from Document 00101 for
inclusion in Standard Form 1442, "Solicitation,
Offer and Award" and "Schedule of Bid Items." Select
first bracketed text.
**************************************************************************
[For unit price bid, see [SF 1442, "Solicitation, Offer and Award" and
"Schedule of Bid Items."] [Section 00101 BID SCHEDULES.]]
**************************************************************************
NOTE: For LANTDIV projects, use the following basis
of bid.
**************************************************************************
[1.5.2
For Bearing Piles
Payment will be at the contract unit price for furnishing labor, materials,
tools, equipment, and incidentals required for furnishing and driving
piles. Work includes furnishing and driving piles including [test piles]
[load test] [jetting] [spudding] [predrilling], pile cutoff, redriving, and
removal and replacement of damaged, mislocated, or otherwise rejected
piles. Base bids on the number of piles with pile length from tip to
cutoff, as indicated, and on total length of piling from tip to cutoff,
including test piles. Include in bid a unit price per [load test[s] and]
unit length of piling based on the quantity stated. From data obtained as
a result of driving the test piles [and load tests] specified herein, the
Government will determine and list for the Contractor the calculated
minimum pile tip elevations, the driving resistance for piles, or both.
The information will be given to the Contractor no later than 10 calendar
days after receipt of complete test pile data. The list shall be used as
the basis for ordering piles. The Contractor shall not order production
piles prior to receipt of the above information from the Government. If
the Contracting Officer requires an increase or a decrease in the linear
footage of piles furnished and installed, the contract price will be
adjusted in accordance with "FAR 52.211-18, Variation in Estimated
Quantity." [Adjustment in contract price will also be made for each
SECTION 02461
Page 10
Previous Page
