project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN WOOD-PRESERVERS' ASSOCIATION (AWPA)
AWPA A1
(1998) Standard Methods for Analysis of
Creosote and Oil-Type Preservatives
AWPA A4
(1993) Standard Methods for Sampling Wood
Preservatives
AWPA A5
(2000) Standard Methods for Analysis of
Oil-Borne Preservatives
AWPA A6
(2001) Method for the Determination of
Oil-Type Preservatives and Water in Wood
AWPA A8
(1990) Qualitative Recovery of Creosote or
Creosote Solution from Freshly Treated
Piles, Poles, or Timber (Squeeze Method)
AWPA A9
(2001) Standard Method for Analysis of
Treated Wood and Treating Solutions by
X-Ray Spectroscopy
AWPA C1
(2000) All Timber Products - Preservative
Treatment by Pressure Processes
AWPA C3
(1999) Piles - Preservative Treatment by
Pressure Processes
AWPA M2
(2001) Standard for Inspection of Treated
Wood Products
AWPA M4
(2001) Standard for the Care of
Preservative-Treated Wood Products
AWPA M6
(1996) Brands Used on Forest Products
ASTM INTERNATIONAL (ASTM)
ASTM A 569/A 569M
(1998) Steel, Carbon (0.15 Maximum
Percent), Hot-Rolled Sheet and Strip,
Commercial
ASTM B 209
(2004) Aluminum and Aluminum-Alloy Sheet
and Plate
ASTM B 209M
(2004) Aluminum and Aluminum-Alloy Sheet
and Plate (Metric)
SECTION 02461
Page 5
Previous Page
