chemical issues along with the conditions for resolution and will become a
part of the contract file.
PART 2
PRODUCTS (NOT APPLICABLE)
PART 3
EXECUTION
3.1
GENERAL REQUIREMENTS
The Contractor shall be responsible for chemical sample acquisition, sample
analysis, instrumental measurements of chemical parameters and for chemical
data quality control. An effective chemical data quality control system
shall be established that meets the requirements for the chemical
measurement DQO applicable to the project. The system shall cover chemical
measurements pertaining to and required for Contractor and subcontractor
produced chemical data. The Contractor shall control field screening,
sampling, and testing in conjunction with remedial activities to meet all
DQO; minimize the amount of excavated material requiring temporary storage;
prevent dilution of contaminated soils with clean soils; and ensure
completion of work within the required time.
3.2
QUALITY CONTROL PLAN
**************************************************************************
NOTE: The designer should incorporate the desired
chemical quality control requirements into the CQC
Plan specified in Section 01451A CONTRACTOR QUALITY
CONTROL.
**************************************************************************
[_____]
3.2.1
Additional Requirements
In addition to the quality control requirements specified in Section 01451A
CONTRACTOR QUALITY CONTROL, the CQC Plan shall incorporate the
qualifications, authority and responsibilities of all chemical quality
management and support personnel. Chemical measurements including sampling
and/or chemical parameter measurement will not be permitted to begin until
after production and acceptance of the CQC Plan, and Government approval of
the SAP.
3.2.2
Chemistry Elements of the CQC Plan
**************************************************************************
NOTE: Define the chemical data quality control
management and staff requirements that assure
compliance with project chemical data requirements.
The level of chemical measurement expertise and
project commitment must be relevant to the magnitude
of the project chemistry requirements.
**************************************************************************
To cover contract related chemical measurements by the Contractor and all
subcontractors, the CQC Plan shall include the following as a minimum.
3.2.2.1
Qualifications
Names, education, experience qualifications, authorities, and
SECTION 01450A
Page 15
Previous Page
