(UMCS); and any other guide specification sections
required by the design.
**************************************************************************
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)
IEEE C62.41
(1991; R 1995) Recommended Practice for
Surge Voltages in Low-Voltage AC Power
Circuits
INSULATED CABLE ENGINEERS ASSOCIATION (ICEA)
ICEA S-84-608
(2002) Telecommunications Cable, Filled
Polyolefin Insulated Copper Conductor
INTERNATIONAL TELECOMMUNICATION UNION (ITU)
ITU H.222.0 AMD 1
(2002) Information Technology Genetic
Coding of Moving Pictures and Associated
Audio Information
ITU V.44
(2000) Pre-published Data Compression
Procedures
ITU V.92
(2000) Enhancements to Recommendation V.90
Series: V, with Amendments 1 and 2
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
NEMA 250
(2003) Enclosures for Electrical Equipment
(1000 Volts Maximum)
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 70
(2005) National Electrical Code
U.S. DEPARTMENT OF AGRICULTURE (USDA)
RUS Bull 345-67
(1998) REA Specification for Filled
Telephone Cables, PE-39
U.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)
47 CFR 15
Radio Frequency Devices
SECTION 16792A
Page 4
Previous Page
