1.3.5.2
Hardware Manual
A manual describing all equipment furnished, including:
a.
General description and specifications.
b.
Installation and checkout procedures.
c.
Equipment electrical schematics and layout drawings.
d.
Data transmission system schematics.
e.
Alignment and calibration procedures.
f.
Manufacturer's repair parts list indicating sources of supply.
g.
Interface definition.
1.3.5.3
Operator's Manual
The operator's manual shall fully explain all procedures and instructions
for operation of the system.
1.3.5.4
Maintenance Manual
The maintenance manual shall include descriptions of maintenance for all
equipment including inspection, calibration, periodic preventative
maintenance, fault diagnosis, and repair or replacement of defective
components.
PART 2
PRODUCTS
2.1
RADIO FREQUENCY COMMUNICATION EQUIPMENT (RFCE)
2.1.1
Government-Furnished
**************************************************************************
NOTE: Designer must identify Government furnished
RFCE.
**************************************************************************
The Government will provide RFCE as indicated. All Government-furnished
RFCE shall be tested by the Contractor to assure that the equipment is in
calibration and functioning correctly. Modifications to the Contractor's
system shall be made to be compatible with the Government-furnished RFCE.
2.1.2
Contractor Furnished
All RFCE not shown as Government-furnished shall be furnished and installed
by the Contractor.
2.2
STATUS DISPLAY AND CONTROL PANEL
The control panel shall be a programmable microprocessor based controller.
The controller may be an external host computer. A minimum of 5 separate
control groups shall be implemented. Each group shall be scheduled as a
function of time-of-day, day-of-week, holiday, external sensing (e.g.,
demand meter), and manual control. A video monitor and keyboard shall be
provided for changing program configuration. The keyboard shall include a
SECTION 16790A
Page 9
Previous Page
