Acceptance Test Report[; G][; G, [_____]]
Test reports in both electronic media form and hard copy booklet
form. Test reports shall indicate all field tests performed to
adjust each component and to prove compliance with the specified
performance criteria. Each test report shall indicate the final
position of controls and operating mode of the system, and the
Manufacturer, model number, and serial number of the test
equipment used in each test. The final acceptance test report
shall include a statement that all specified requirements and
conditions have been satisfied.
SD-07 Certificates
Certificates of Compliance[; G][; G, [_____]]
Proof that the items conform to the specified codes or
standards, including the requirements of CFR, NFPA, and UL.
SD-08 Manufacturer's Instructions
Installation[; G][; G, [_____]]
Preprinted material from the Manufacturer describing
installation requirements and safety precautions. Manufacturer's
requirements for the use of specific products.
SD-10 Operation and Maintenance Data
Operating and Maintenance Manuals[; G][; G, [_____]]
Submit O&M data in accordance with Section 01781 OPERATION AND
MAINTENANCE DATA, Data Package 5. Reproduced copies of O&M
Manuals will not acceptable if a printed manual is available from
the Manufacturer. O&M Manuals available from the Manufacturer on
a CD shall be submitted in addition to the hard copy manuals.
Submit addenda to the O&M Manuals from the Manufacturer that
describe any part of the system application design that is either
not covered by, or deviates from, the O&M Manuals from the
Manufacturer.
Software Manuals[; G][; G, [_____]];
The software manual describing the functions of all software and
including all other information necessary to enable proper
loading, setup, testing, and operation. The software manual shall
include:
a.
Definition of terms and functions.
b.
Use of system and applications software.
c.
Procedures for system initialization, start-up and a shutdown.
d.
Alarm reports.
e.
Reports generation.
f.
Database format and requirements for data entry.
SECTION 16731A
Page 12
Previous Page
