projects and for Contractor Quality Control approval
for Navy projects.
**************************************************************************
Government approval is required for submittals with a "G" designation;
submittals not having a "G" designation are [for Contractor Quality Control
approval.][for information only. When used, a designation following the
"G" designation identifies the office that will review the submittal for
the Government.] The following shall be submitted in accordance with
Section 01330 SUBMITTAL PROCEDURES:
SD-01 Preconstruction Submittals
Qualifications[; G][; G, [_____]]
NCAV System Contractor, Installer, and Manufacturer
qualifications. Proposed system information.
SD-02 Shop Drawings
Detail Drawings[; G][; G, [_____]]
Drawings and diagrams specifically prepared to indicate the work
of this project.
Coordination Drawings[; G][; G, [_____]]
Coordination drawings indicating the details of all electronic
and physical interfaces between the NCAV System and all interfaced
telecommunications systems, including the exact point and type of
demarcation.
As-Built System Drawings[; G][; G, [_____]]
As-built drawings including all approved detail drawings and
coordination drawings that have been updated to indicate the final
as-built configuration of all equipment and cables as installed.
In addition to the architectural room names and numbers, as-built
drawings shall indicate the medical facility user room names and
numbers for all rooms where equipment has been installed.
SD-03 Product Data
Material and Equipment[; G][; G, [_____]]
The Manufacturer's product data and specifications, and other
information in sufficient detail and scope to verify that each
product item is in compliance with requirements of the contract
documents. Include a description of the system operating
characteristics and individual product data sheets for each item
of equipment indicating descriptive and technical data, operating
temperature limits, heat dissipated, electrical requirements,
dimensions and mounting restrictions. If a product data sheet
covers several types or sizes of the product, the sheet shall be
marked to indicate the specific item provided. A letter from the
Manufacturer, stating that the medical facility will be notified
whenever system upgrades and enhancements are available, shall
accompany the submittal. Listing of all hardware, software,
cables, and materials products arranged in the order of the
SECTION 16731A
Page 10
Previous Page
