d.
The equipment and values to be verified.
e.
The condition specified for the test.
f.
The test results, signed and dated.
g.
A description of
adjustments made.
SD-07 Certificates
Material and Equipment
Where materials or equipment are specified to conform to the
standards of the Underwriters Laboratories (UL) or to be
constructed or tested, or both, in accordance with the standards
of the American National Standards Institute (ANSI), the Institute
of Electrical and Electronics Engineers (IEEE), or the National
Electrical Manufacturers Association (NEMA), the Contractor shall
submit proof that the items provided under this section of the
specifications conform to such requirements. The label of, or
listing by, UL will be acceptable as evidence that the items
conform thereto. Either a certification or a published catalog
specification data statement, to the effect that the item is in
accordance with the referenced ANSI or IEEE standard, will be
acceptable as evidence that the item conforms thereto. A similar
certification or published catalog specification data statement to
the effect that the item is in accordance with the referenced NEMA
standard, by a company listed as a member company of NEMA, will be
acceptable as evidence that the item conforms thereto. In lieu of
such certification or published data, the Contractor may submit a
certificate from a recognized testing agency equipped and
competent to perform such services, stating that the items have
been tested and that they conform to the requirements listed,
including methods of testing of the specified agencies.
SD-10 Operation and Maintenance Data
Operation and Maintenance Manuals
[Six] [_____] copies of Operation and Maintenance manuals for
the electrical distribution system shall be provided, within [7]
[_____] calendar days following the completion of tests and shall
include assembly, installation, operation and maintenance
instructions, spare parts data which provides supplier name,
current cost, catalog order number, and a recommended list of
spare parts to be stocked. Manuals shall also include data
outlining detailed procedures for system startup and operation,
and a troubleshooting guide which lists possible operational
problems and corrective action to be taken. A brief description
of all equipment, basic operating features, and routine
maintenance requirements shall also be included. Documents shall
be bound in a binder marked or identified on the spine and front
cover. A table of contents page shall be included and marked with
pertinent contract information and contents of the manual. Tabs
shall be provided to separate different types of documents, such
as catalog ordering information, drawings, instructions, and
spare-parts data. Index sheets shall be provided for each section
of the manual when warranted by the quantity of documents included
under separate tabs or dividers. Three additional copies of the
SECTION 16370A
Page 12
Previous Page
