UNDERWRITERS LABORATORIES (UL)
UL 1242
(2000; Rev thru May 2003) Electrical
Intermediate Metal Conduit -- Steel
UL 467
(2004) Grounding and Bonding Equipment
UL 486A-486B
(2003; Rev thru Apr 2004) Wire Connectors
UL 510
(2005) Polyvinyl Chloride, Polyethylene,
and Rubber Insulating Tape
UL 514A
(2004) Metallic Outlet Boxes
UL 514B
(2004) Conduit, Tubing and Cable Fittings
UL 6
(2000; Rev thru May 2003) Rigid Metal
Conduit
UL 651
(2000) Schedule 40 and 80 Rigid PVC Conduit
UL 83
(2003; Rev thru Mar 2004)
Thermoplastic-Insulated Wires and Cables
UL 854
(2004) Service-Entrance Cables
1.2
RELATED REQUIREMENTS
Section 16050N BASIC ELECTRICAL MATERIALS AND METHODS and Section 02582
ELECTRICAL MANHOLE AND HANDHOLE, applies to this section with additions and
modifications specified herein.
[1.2.1
Underground Service
Terminate underground service into building at a point 1525 mm 5 feet
outside the building and projections thereof, except that service
conductors shall be continuous to the interior terminating point indicated.
Connections of the service to the service switch, panelboard, or load
center is included in Section 16402 INTERIOR DISTRIBUTION SYSTEM. Protect
ends of underground conduit with threaded metal caps or plastic plugs as
applicable until connections are made.
]1.3
DEFINITIONS
a.
In the text of this section, the words conduit and duct are used
interchangeably and have the same meaning.
b.
In the text of this section, "medium voltage cable splices," and
"medium voltage cable joints" are used interchangeably and have
the same meaning.
1.4
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
SECTION 16302N
Page 7
Previous Page
