a.
[Procedures for each routine maintenance item.] [Procedures for
troubleshooting.] [Factory-service, take-down overhaul, and repair
service manuals, with parts lists.]
b.
The manufacturer's recommended maintenance schedule.
c.
A component list which includes the manufacturer's name, address,
type or style, model or serial number, rating, and catalog number
for the major components listed in paragraph GENERAL REQUIREMENTS.
d.
A list of spare parts for each piece of equipment and a complete
list of materials and supplies needed for operation.
1.7
SPECIAL TOOLS AND FILTERS
Two sets of special tools and two sets of filters required for maintenance
shall be provided. Special tools are those that only the manufacturer
provides, for special purposes, or to reach otherwise inaccessible parts.
One handset shall be provided for each electronic governor when required to
indicate and/or change governor response settings. Two complete sets of
filters shall be supplied in a suitable storage box. these filters shall
be in addition to filters replaced after testing.
PART 2
PRODUCTS
2.1
MATERIALS AND EQUIPMENT
Materials and equipment shall be as specified.
2.1.1
Circuit Breakers, Low Voltage
NEMA AB 1, UL 489, and NEMA SG 6.
2.1.2
Filter Elements (Fuel-oil, Lubricating-oil, and Combustion-air)
Manufacturer's standard.
2.1.3
Instrument Transformers
ANSI C12.11.
2.1.4
Pipe (Sleeves, Fuel/Lube-oil, Compressed-Air, Coolant and Exhaust)
ASTM A 53/A 53M, ASTM A 106/A 106M or ASTM A 135, steel pipe. Pipe smaller
than 50 mm 2 inches shall be Schedule 80. Pipe 50 mm 2 inches and larger
shall be Schedule 40.
2.1.5
Pipe Flanges and Fittings
a.
Pipe Flanges and Flanged Fittings:
ASTM A 181/A 181M, Class 60,
or ASME B16.5, Grade 1, Class 150.
b.
Pipe Welding Fittings: ASTM A 234/A 234M, Grade WPB or WPC, Class
150, or ASME B16.11, 1360.7 kg 3000 lb.
c.
Threaded Fittings:
ASME B16.3, Class 150.
d.
Valves:
MSS SP-80, Class 150.
SECTION 16264A
Page 28
Previous Page
