Strip
ASTM A 193/A 193M
(2004c) Alloy-Steel and Stainless Steel
Bolting Materials for High-Temperature
Service
ASTM A 307
(2004) Carbon Steel Bolts and Studs, 60
000 PSI Tensile Strength
ASTM A 36/A 36M
(2004) Carbon Structural Steel
ASTM A 53/A 53M
(2004a) Pipe, Steel, Black and Hot-Dipped,
Zinc-Coated, Welded and Seamless
ASTM A 924/A 924M
(2004) General Requirements for Steel
Sheet, Metallic-Coated by the Hot-Dip
Process
ASTM B 117
(2002) Operating Salt Spray (Fog) Apparatus
ASTM B 32
(2004) Solder Metal
ASTM E 2016
(1999; R 2004) Industrial Woven Wire Cloth
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
NEMA MG 1
(2003; R 2004) Motors and Generators
SHEET METAL AND AIR CONDITIONING CONTRACTORS' NATIONAL ASSOCIATION
(SMACNA)
SMACNA Rectangle Duct Const
(1980, 1st Ed) Rectangular Industrial Duct
Construction Standards
SMACNA Rnd Duct Const
(1999, 2nd Ed) Round Industrial Duct
Construction Standards
1.2
COORDINATION OF TRADES
Ductwork offsets, fittings, and any other accessories required shall be
furnished as specified to provide a complete exhaust system installation
and to eliminate interference with other construction.
1.3
DELIVERY AND STORAGE
All equipment delivered and placed in storage shall be housed in a manner
to preclude any damage from the weather, humidity and temperature
variations, dirt and dust, or other contaminants. Additionally, all
ductwork, flexible connections and pipes shall either be capped or plugged
until installed.
1.4
FIELD MEASUREMENTS
The Contractor shall become familiar with all details of the work, verify
all dimensions in the field, and shall advise the Contracting Officer of
any discrepancy before performing the work.
SECTION 15940A
Page 5
Previous Page
