1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AIR MOVEMENT AND CONTROL ASSOCIATION INTERNATIONAL(AMCA)
AMCA 210
(1999) Laboratory Methods of Testing Fans
for Aerodynamic Performance Rating
AMCA 300
(1996) Reverberant Room Method for Sound
Testing of Fans
AIR-CONDITIONING AND REFRIGERATION INSTITUTE (ARI)
ARI Guideline D
(1996) Application and Installation of
Central Station Air-Handling Units
AMERICAN BEARING MANUFACTURERS ASSOCIATION (ABMA)
ABMA 11
(1990; R 1999) Load Ratings and Fatigue
Life for Roller Bearings
ABMA 9
(1990; R 2000) Load Ratings and Fatigue
Life for Ball Bearings
AMERICAN WELDING SOCIETY (AWS)
AWS A5.8
(1992) Filler Metals for Brazing and Braze
Welding
ASME INTERNATIONAL (ASME)
ASME B16.21
(1992) Nonmetallic Flat Gaskets for Pipe
Flanges
ASME BPVC SEC IX
(2001) Boiler and Pressure Vessel Code;
Section IX, Welding and Brazing
Qualifications
ASTM INTERNATIONAL (ASTM)
ASTM A 1011/A 1011M
(2004a) Steel, Sheet and Strip,
Hot-Rolled, Carbon, Structural, High
Strength Low-Alloy and High-Strength
Low-Alloy With Improved Formability
ASTM A 167
(2004) Stainless and Heat-Resisting
Chromium-Nickel Steel Plate, Sheet, and
SECTION 15940A
Page 4
Previous Page
