record will be acceptable if a certified record of satisfactory field
operation, for not less than 6000 hours exclusive of the manufacturer's
factory tests, can be shown. The system shall be supported by a service
organization certified by the system manufacturer.
2.2
ASBESTOS PROHIBITION
Asbestos and asbestos-containing products shall not be used.
2.3
NAMEPLATES
All equipment shall have a nameplate that identifies the manufacturer's
name, address, type or style, model or serial number, and catalog number.
2.4
SPECIAL TOOLS AND SPARE PARTS
One set of special tools, calibration devices, and instruments required for
operation, calibration, and maintenance of the equipment shall be provided.
In addition, a two year supply of all spare parts for system operation
shall be furnished.
2.5
EQUIPMENT GUARDS AND ACCESS
**************************************************************************
NOTE: Catwalks, ladders, and guardrails may be
required. If so, select the applicable item and
indicate on drawings. If not applicable, delete the
entire sentence within the brackets.
**************************************************************************
Belts, pulleys, chains, gears, couplings, projecting setscrews, keys, and
other rotating parts exposed to personnel contact shall be fully enclosed
or guarded according to OSHA requirements. High temperature equipment and
piping exposed to contact by personnel or where it creates a potential fire
hazard shall be properly guarded or covered with insulation of a type
specified. Catwalks, operating platforms, ladders, and guardrails shall be
provided where shown and shall be constructed according to Section 05500A
MISCELLANEOUS METAL.
2.6
PIPING COMPONENTS
Piping components shall be as specified in Section 15895 AIR SUPPLY,
DISTRIBUTION, VENTILATION, AND EXHAUST SYSTEM.
2.7
AIR SUPPLY, DISTRIBUTION, VENTILATION, AND EXHAUST
**************************************************************************
NOTE: Gas-fired furnaces, which are often used in
conjunction with evaporative cooling systems, are
specified in Section 15566 WARM AIR HEATING SYSTEMS.
**************************************************************************
All ductwork and related accessories, including air filters and terminal
units, shall be as specified in Section 15895 AIR-SUPPLY, DISTRIBUTION,
VENTILATION, AND EXHAUST SYSTEM.
2.8
ELECTRICAL WORK
**************************************************************************
SECTION 15690A
Page 9
Previous Page
