1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AIR MOVEMENT AND CONTROL ASSOCIATION INTERNATIONAL(AMCA)
AMCA 210
(1999) Laboratory Methods of Testing Fans
for Aerodynamic Performance Rating
AIR-CONDITIONING AND REFRIGERATION INSTITUTE (ARI)
ARI 410
(2001; Addendum 2002) Forced-Circulation
Air-Cooling and Air-Heating Coils
AMERICAN BEARING MANUFACTURERS ASSOCIATION (ABMA)
ABMA 11
(1990; R 1999) Load Ratings and Fatigue
Life for Roller Bearings
ABMA 9
(1990; R 2000) Load Ratings and Fatigue
Life for Ball Bearings
ASTM INTERNATIONAL (ASTM)
ASTM A 1011/A 1011M
(2004a) Steel, Sheet and Strip,
Hot-Rolled, Carbon, Structural, High
Strength Low-Alloy and High-Strength
Low-Alloy With Improved Formability
ASTM A 123/A 123M
(2002) Zinc (Hot-Dip Galvanized) Coatings
on Iron and Steel Products
ASTM A 167
(2004) Stainless and Heat-Resisting
Chromium-Nickel Steel Plate, Sheet, and
Strip
ASTM A 176
(1999; R 2004) Stainless and
Heat-Resisting Chromium Steel Plate,
Sheet, and Strip
ASTM A 36/A 36M
(2004) Carbon Structural Steel
ASTM A 924/A 924M
(2004) General Requirements for Steel
Sheet, Metallic-Coated by the Hot-Dip
Process
ASTM B 117
(2002) Operating Salt Spray (Fog) Apparatus
SECTION 15690A
Page 4
Previous Page
