ASTM B 209
(2004) Aluminum and Aluminum-Alloy Sheet
and Plate
ASTM B 209M
(2004) Aluminum and Aluminum-Alloy Sheet
and Plate (Metric)
ASTM B 696
(2000; R 2004) Coatings of Cadmium
Mechanically Deposited
ASTM D 1654
(1992; R 2000) Evaluation of Painted or
Coated Specimens Subjected to Corrosive
Environments
ASTM E 2016
(1999; R 2004) Industrial Woven Wire Cloth
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
NEMA MG 1
(2003; R 2004) Motors and Generators
THE SOCIETY FOR PROTECTIVE COATINGS (SSPC)
SSPC PS 10.01
(1982; R 2000) Hot-Applied Coal Tar Enamel
Painting System
SSPC Paint 16
(1982; R 2000) Coal Tar Epoxy-Polyamide
Black (or Dark Red) Paint
UNDERWRITERS LABORATORIES (UL)
UL 507
(1999; Rev thru Dec 2003) Electric Fans
UL 746C
(2004) Polymeric Materials - Use in
Electrical Equipment Evaluations
UL 900
(2004) Air Filter Units
UL 94
(1996; Rev thru Dec 2003) Tests for
Flammability of Plastic Materials for
Parts in Devices and Appliances
1.2
COORDINATION OF TRADES
Tank supports, piping offsets, fittings, and any other accessories required
shall be furnished as required to provide a complete installation and to
eliminate interference with other construction.
1.3
DELIVERY AND STORAGE
All equipment delivered and placed in storage shall be stored with
protection from the weather, humidity and temperature variations, dirt and
dust, or other contaminants.
1.4
FIELD MEASUREMENTS
The Contractor shall become familiar with all details of the work, verify
all dimensions in the field, and shall advise the Contracting Officer of
any discrepancy before performing the work.
SECTION 15690A
Page 5
Previous Page
