MSS SP-85
(2002) Cast Iron Globe & Angle Valves,
Flanged and Threaded Ends
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
NEMA 250
(2003) Enclosures for Electrical Equipment
(1000 Volts Maximum)
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 211
(2003) Chimneys, Fireplaces, Vents, and
Solid Fuel-Burning Appliances
NFPA 31
(2001) Installation of Oil Burning
Equipment
NFPA 54
(2002) National Fuel Gas Code
NFPA 70
(2005) National Electrical Code
NFPA 85
(2004) Boiler and Combustion Systems
Hazards Code
UNDERWRITERS LABORATORIES (UL)
UL 1738
(1993; Rev thru Dec 2000) Venting Systems
for Gas-Burning Appliances, Categories II,
III and IV
UL 296
(2003; Rev thru Jan 2004) Oil Burners
UL 726
(1995; Rev thru Jan 2001) Oil-Fired Boiler
Assemblies
UL 795
(1999) Commercial-Industrial Gas Heating
Equipment
UL Gas&Oil Dir
and Gases Equipment Directory
1.2
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
submittal requires Government approval. Some
submittals are already marked with a "G". Only
delete an existing "G" if the submittal item is not
complex and can be reviewed through the Contractor's
Quality Control system. Only add a "G" if the
submittal is sufficiently important or complex in
context of the project.
For submittals requiring Government approval on Army
SECTION 15569A
Page 11
Previous Page
