The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AIR MOVEMENT AND CONTROL ASSOCIATION INTERNATIONAL(AMCA)
AMCA 801
(2001) Industrial Process/Power Generation
Fans: Specification Guidelines
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI Z21.13
(2001; A 2002) Gas-Fired Low-Pressure
Steam and Hot Water Boilers
AMERICAN SOCIETY OF HEATING, REFRIGERATING AND AIR-CONDITIONING
ENGINEERS (ASHRAE)
ASHRAE 52.1
(1992) Gravimetric and Dust-Spot
Procedures for Testing Air-Cleaning
Devices Used in General Ventilation for
Removing Particulate Matter
AMERICAN WATER WORKS ASSOCIATION(AWWA)
AWWA C606
(2004) Grooved and Shouldered Joints
AMERICAN WELDING SOCIETY (AWS)
AWS A5.8
(1992) Filler Metals for Brazing and Braze
Welding
AWS B2.2
(1991) Brazing Procedure and Performance
Qualification
ASME INTERNATIONAL (ASME)
ASME B1.20.1
(1983; R 2001) Pipe Threads, General
Purpose, Inch
ASME B16.11
(2002) Forged Fittings, Socket-Welding and
Threaded
ASME B16.15
(1985; R 2004) Cast Bronze Threaded
Fittings Classes 125 and 250
ASME B16.18
(2002) Cast Copper Alloy Solder Joint
Pressure Fittings
ASME B16.20
(2000) Metallic Gaskets for Pipe Flanges -
Ring-Joint, Spiral Wound, and Jacketed
ASME B16.22
(2002) Wrought Copper and Copper Alloy
Solder Joint Pressure Fittings
ASME B16.26
(1988) Cast Copper Alloy Fittings for
Flared Copper Tubes
ASME B16.3
(1998) Malleable Iron Threaded Fittings
SECTION 15569A
Page 7
Previous Page
