values to suit fuel oil used when other than No. 6.
**************************************************************************
(1)
Number of assemblies:
[_____]
(2)
Tag numbers:
[_____]
(3)
Capacity each at 450 ssu:
[_____] L/s gpm
(4)
Suction lift required:
[_____] kPa ft of water
(5)
Discharge pressure:
[_____] kPa (gage) psig
(6)
Operating temp.:
[27 to 5480 to 130] [_____to_____] degrees C
F
(7)
Viscosity range:
[450 to 5000] [_____to_____] ssu
(8)
Specific gravity:
[.92 to .99] [_____to_____]
(9)
Viscosity at brake power selection point:
[9000] [_____] ssu
(10) Maximum pump speed:
1750
rpm
(11) Motor kW hp:
[_____]
(12) Fuel oil:
No. [6, Low Sulfur] [_____]
b.
Transfer pumps (for fuel oil transfer from tanks to heating plant):
**************************************************************************
NOTE: At the text below, the values enclosed in
brackets are for No. 6 Low Sulfur fuel oil. Adjust
values to suit fuel oil used when other than No. 6.
**************************************************************************
(1)
Number of assemblies:
[_____]
(2)
Tag numbers:
As indicated
(3)
Capacity at 450 ssu:
[_____] L/s gpm
(4)
Suction lift required:
[_____] kPa (gage) ft of water
(5)
Discharge pressure:
[_____] kPa (gage) psig
(6)
Operating temperature:
[49120] [_____] degress C F
(7)
Viscosity range:
[450 to 3000] [_____ to _____] ssu
(8)
Specific gravity:
[.92 to .99] [_____ to _____]
(9)
Viscosity at brake power point:
[5000] [_____] ssu
(10) Maximum pump speed:
1750 rpm
(11) Motor kW hp:
[_____]
(12) Fuel oil:
No. [6, low sulfur] [_____]
SECTION 15502N
Page 29
Previous Page
