a.
Certified outline and general arrangement drawings;
b.
Certified pump curves;
c.
Equipment detail sheets including viscosity controller, heater and
valves;
d.
Electrical wiring diagrams; and
e.
Oil tanks, foundations, tank heaters, appurtenances, water drawoff
and level indication.
1.4.2.9
Piping and Specialty Items
Manufacturer's standard size and include the following:
a.
Details of valves and fittings;
b.
Feedwater regulator details and schematics;
c.
Details and schematics of feedwater automatic recirculation; and
d.
Installation details for ball expansion joints for saturated steam
piping including allowable angular flex and minimum offset
dimensions.
1.4.2.10
Furnishing Approved Drawings
Furnish one reproducible mylar shop drawing of each approved drawing sheet
to the Contracting Officer for the following items:
a.
Boiler layout, foundations, construction and details including
economizers, and auxiliaries;
b.
Breeching layout, construction and details;
c.
Burner control and flame safety schematics;
d.
Burner details;
e.
f.
Fuel tanks, foundations and appurtenances;
g.
Feedwater automatic recirculation system;
h.
Piping schematics;
i.
Control diagram schematics including control panel construction
and layouts;
j.
Coal handling system;
k.
Stoker details; and
l.
Ash handling system.
SECTION 15501N
Page 33
Previous Page
