Framed Instructions[; G][; G, [_____]]
Diagrams, instructions, and other sheets, prior to posting.
Manufacturer's recommendations for the installation of bell and
spigot and hubless joints for cast iron soil pipe.
SD-06 Test Reports
Tests, Flushing and Disinfection
Test reports in booklet form showing all field tests performed
to adjust each component and field tests performed to prove
compliance with the specified performance criteria, upon
completion and testing of the installed system. Each test report
shall indicate the final position of controls.
Test of Backflow Prevention Assemblies
Certification of proper operation shall be accomplished with
requirements in accordance with state regulations by an individual
certified by the state to perform such test. If no state
requirement exists, the Contractor shall have the manufacturer's
representative test the device, to ensure the unit is properly
installed and performing as intended. The Contractor shall
provide written documentation of the tests performed and signed by
the individual performing the tests.
SD-07 Certificates
Station Outlets
Proof that outlets as an assembly conform to the requirements of
Underwriters Laboratories, Inc.
Materials and Equipment
Where materials or equipment are specified to comply with
requirements of AGA, ASME, or NSF proof of such compliance shall
be included. The label or listing of the specified agency will be
acceptable evidence. In lieu of the label or listing, a written
certificate may be submitted from an approved, nationally
recognized testing organization equipped to perform such services,
stating that the items have been tested and conform to the
requirements and testing methods of the specified agency. Where
equipment is specified to conform to ASME requirements, the
design, fabrication, and installation shall conform to the code.
Bolts
Written certification from the bolt manufacturer that the bolts
furnished comply with specified requirements. The certification
shall include illustrations of product-required markings, date of
manufacture, and number of each type of bolt to be furnished based
on this certification.
Medical Gas and Vacuum System Work
Written certificate of installer certification in accordance
with ASSE 6010 and written certificate of verifier certification
SECTION 15405A
Page 20
Previous Page
