l.
Rubber Gaskets for Grooved Pipe:
ASTM D 2000, maximum temperature
110 degrees C 230 degrees F.
m.
Flexible Elastomeric Seals:
ASTM D 3139, ASTM D 3212 or ASTM F 477.
n.
Heat treated carbon
steel, ASTM A 183.
o.
Solvent Cement for Transition Joints between ABS and PVC
Nonpressure Piping Components: ASTM D 3138.
p.
Plastic Solvent Cement for ABS Plastic Pipe:
ASTM D 2235.
q.
Plastic Solvent Cement for PVC Plastic Pipe:
ASTM D 2564 and ASTM
D 2855.
r.
Plastic Solvent Cement for CPVC Plastic Pipe:
ASTM F 493.
s.
Flanged Fittings: Flanged fittings including flanges, bolts,
nuts, bolt patterns, etc. shall be in accordance with ASME B16.5
Class 150 and shall have the manufacturers trademark affixed in
accordance with MSS SP-25. Flange material shall conform to ASTM
A 105/A 105M. Blind flange material shall conform to ASTM A 516/A
516M cold service and ASTM A 515/A 515M for hot service. Bolts
shall be high strength or intermediate strength with material
conforming to ASTM A 193/A 193M.
t.
Elastomeric Seals: Elastomeric seals (gaskets) for joining
plastic pipe ASTM F 477: thermoplastic elastomeric seals
(gaskets) for joining plastic pipe ASTM F 913.
u.
Plastic Solvent Cement for Styrene Rubber Plastic Pipe:
ASTM D
3122.
2.1.2
a.
Water Hammer Arresters:
PDI WH 201.
b.
Copper, Sheet and Strip for Building Construction:
ASTM B 370.
c.
Asphalt Roof Cement:
ASTM D 2822.
d.
Hose Clamps:
SAE J1508.
e.
Supports for Off-The-Floor Plumbing Fixtures:
ASME A112.6.1M.
f.
Metallic Cleanouts:
ASME A112.36.2M.
g.
Plumbing Fixture Setting Compound: A preformed
flexible ring seal
molded from hydrocarbon wax material. The seal
material shall be
nonvolatile, nonasphaltic and contain germicide
and provide
watertight, gastight, odorproof and verminproof
properties.
h.
Coal-Tar Protective Coating and Linings for Steel Water Pipelines:
AWWA C203.
SECTION 15405A
Page 24