for Military Medical and Dental Facilities
U.S. GENERAL SERVICES ADMINISTRATION (GSA)
CID A-A-50012
(Basic) Garbage Disposal Machine,
Commercial
U.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)
10 CFR 430
Energy Conservation Program for Consumer
Products
21 CFR 175
Indirect Food Additives: Adhesives and
Components of Coatings
PL 93-523
(1974; A 1999) Safe Drinking Water Act
UNDERWRITERS LABORATORIES (UL)
UL 174
(2004) Household Electric Storage Tank
Water Heaters
UL 732
(1995; Rev thru Jan 1999) Oil-Fired
Storage Tank Water Heaters
UL 749
(1997; Rev thru Mar 2003) Household
Dishwashers
UL 921
(1996; Rev thru Mar 2000) Commercial
Electric Dishwashers
1.2
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
submittal requires Government approval. Some
submittals are already marked with a "G". Only
delete an existing "G" if the submittal item is not
complex and can be reviewed through the Contractor's
Quality Control system. Only add a "G" if the
submittal is sufficiently important or complex in
context of the project.
For submittals requiring Government approval on Army
projects, a code of up to three characters within
the submittal tags may be used following the "G"
designation to indicate the approving authority.
Codes for Army projects using the Resident
Management System (RMS) are: "AE" for
Architect-Engineer; "DO" for District Office
(Engineering Division or other organization in the
District Office); "AO" for Area Office; "RO" for
Resident Office; and "PO" for Project Office. Codes
SECTION 15405A
Page 18
Previous Page
