"G" designation identifies the office that will review the submittal for
the Government.] The following shall be submitted in accordance with
Section 01330 SUBMITTAL PROCEDURES:
SD-02 Shop Drawings
Air compressor system
Include wiring diagrams of the air compressor with all
accessories. The minimum acceptable scale is [1:501/4 inch to one
foot] [_____].
SD-03 Product Data
**************************************************************************
NOTE: Include carbon monoxide monitor in systems
which are used for breathing air per DM 3.5, Section
3.
**************************************************************************
Air compressor
Air intake devices
Bypass line silencer
Air flow rate and pressure recorder
[
Carbon monoxide monitor]
Submit manufacturer's catalog data for compressor and auxiliary
equipment in the format provided in API Std 672, Appendix A.
Submit all applicable information. For air compressor, include
aftercooler, intercoolers, oil cooler, lubrication system, and
control valves. Submit air compressor and intercooler performance
curves at specified summer and winter design conditions.
SD-06 Test Reports
Air compressor performance tests
Balance tests
Sound level and run-in tests
Obtain approval prior to shipping compressor.
Air compressor performance tests
Instrumentation test
Sound level tests
Air compressor system tests
The test supervisor shall certify performance by test to be in
compliance with specifications.
SD-07 Certificates
SECTION 15213N
Page 8
Previous Page
