delete the information from this section.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN GEAR MANUFACTURERS ASSOCIATION (AGMA)
AGMA 390.03A
(1980; Errata 1983; R 1988) Gear Handbook
Gear Classification, Materials and
Measuring Methods for Bevel, Hypoid, Fine
Pitch Wormgearing and Racks Only as
Unassembled Gears (Partially replaced by
AGMA 2000-A)
AMERICAN PETROLEUM INSTITUTE (API)
API Std 672
(2004) Packaged, Integrally Geared
Centrifugal Air Compressors for Petroleum,
Chemical, and Gas industry Services
ASME INTERNATIONAL (ASME)
ASME B1.20.1
(1983; R 2001) Pipe Threads, General
Purpose, Inch
ASME B16.1
(1998) Cast Iron Pipe Flanges and Flanged
Fittings
ASME B16.5
(2003) Pipe Flanges and Flanged Fittings
ASME B40.1
(1991) Gauges - Pressure Indicating Dial
Type - Elastic Element
ASME BPVC SEC VIII D1
(2001) Boiler and Pressure Vessel Code;
Section VIII, Pressure Vessels Division 1
- Basic Coverage
ASME PTC 10
(1997; R 2003) Test Code on Compressors
and Exhausters
ASTM INTERNATIONAL (ASTM)
ASTM A 36/A 36M
(2004) Carbon Structural Steel
SECTION 15213N
Page 5
Previous Page
