site.
2.8.1.12
Card Size and Dimensional Stability
**************************************************************************
NOTE: Specify the standard card size of 54 x 85 mm
(2-1/8 x 3-3/8 inch) unless a different size card is
needed. If a non-standard size card is specified
the designer must make certain that the card size
specified will work with the photo badging system
and the card reader specified.
**************************************************************************
Credential cards shall be [54 x 85] [_____] mm [2-1/8 x 3-3/8 ] [_____]
inches. The credential card material shall be dimensionally stable so that
an undamaged card with deformations resulting from normal use shall be
readable by the card reader.
2.8.1.13
Card Materials and Physical Characteristics
The credential card shall be abrasion resistant, non-flammable, and present
no toxic hazard to humans when used in accordance with manufacturer's
instructions. The credential card shall be impervious to solar radiation
and the effects of ultra-violet light.
2.8.1.14
Card Construction
**************************************************************************
NOTE: Specify whether additional security
enhancements are needed. Choose which security
enhancement is needed. Specify card lamination and
assembly equipment if needed at the site.
**************************************************************************
The credential card shall be of core and laminate or monolithic
construction. Lettering, logos and other markings shall be hot stamped
into the credential material or direct printed. [The credential card shall
incorporate [holographic images] [phosphorous ink] as a security
enhancement.] [The Contractor shall provide a means to allow onsite
assembly and lamination of credential cards by Government personnel.]
2.8.1.15
Card Durability and Maintainability
The credential cards shall be designed and constructed to yield a useful
lifetime of at least 5000 insertions or swipes or 5 years whichever results
in a longer period of time. The credential card shall be able to be
cleaned by wiping the credential card with a sponge or cloth wet with a
soap and water solution.
2.8.1.16
Warranty
The credential card shall include a minimum 3-year warranty.
2.8.2
Keypads
**************************************************************************
NOTE: The designer will specify the type of keypad
needed for the site. The scrambled keypad should be
specified for very high security needs. If a
SECTION 13720A
Page 71
Previous Page
