SD-10 Operation and Maintenance Data
Operation and Maintenance Procedures
[Six] [_____] copies of operation and [six] [_____] copies of
maintenance manuals for the equipment furnished. One complete set
prior to performance testing and the remainder upon acceptance.
Manuals shall be approved prior to the field training course.
Operating manuals shall detail the step-by-step procedures
required for system filling, startup, operation, and shutdown.
Operating manuals shall include the manufacturer's name, model
number, service manual, parts list, and brief descriptions of all
equipment and their basic operating features. Maintenance manuals
shall list routine maintenance procedures, possible breakdowns and
repairs, troubleshooting guides, piping and equipment layout,
balanced fluid flow rates, and simplified wiring and control
diagrams of the system as installed.
1.3
SYSTEM DESCRIPTION
**************************************************************************
NOTE: For systems located in an area subject to
freezing, the closed-loop antifreeze system is to be
used. This system requires the propylene-glycol
based heat transfer fluid, two pumps, a heat
exchanger, and an expansion tank. For systems at
locations in which freezing temperatures do not
occur, the direct circulation system may be used.
TM 5-804-2 provides further information on these
system types and their appropriate uses.
**************************************************************************
The solar energy system shall be arranged for preheating of service
(domestic and/or process) water using flat plate liquid solar collectors.
System components shall include a solar collector array, storage tank,
pump[s], automatic controls, instrumentation, interconnecting piping and
fittings, [uninhibited food-grade propylene-glycol and water heat transfer
fluid in a closed loop], [potable water heat transfer fluid in an open
loop], [heat exchanger], [expansion tank], and accessories required for the
operation of the system.
1.4
DELIVERY, STORAGE, AND HANDLING
All equipment delivered and placed in storage shall be stored with
protection from the weather, excessive humidity and excessive temperature
variation, and dirt and dust or other contaminants.
1.5
WELDER QUALIFICATIONS
Procedures and welders shall be qualified in accordance with the code under
which the welding is specified to be accomplished.
1.6
SPARE PARTS
The Contractor shall submit data for each different item of material and
equipment listed, including a complete list of parts and supplies, with
current unit prices and source of supply; a list of parts and supplies that
are either normally furnished at no extra cost with the purchase of
SECTION 13600A
Page 9
Previous Page
